Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Ultramid® B40 - PA6 - BASF

Material Data Center offers the following functions for Ultramid® B40:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Ultramid B datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
熱的特性 - その他の特性. - 材料特有の特性
Any use of this information falls under the rules of our disclaimer.
熱的特性値単位テスト基準
ISO データ
溶融温度, 10ﾟC/min 220 °C ISO 11357-1/-3
その他の特性.値単位テスト基準
吸水率. 9.5 % Sim. to ISO 62
吸湿率 2.6 % Sim. to ISO 62
密度. 1140 kg/m³ ISO 1183
Moisture Content 0.06 % -
Bulk density 780 kg/m³ -
材料特有の特性値単位テスト基準
ISO データ
粘度数. 250 cm³/g ISO 307, 1157, 1628
特殊な特性
成形加工法.
Blown Film Extrusion, フィルム押出成形.
Certifications
Food contact, Food approval FDA 21 CFR
アプリケーション
Monofilament
領域別の利用可能性
ヨーロッパ.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.